- What is the correct forward position before turning into the angled parking space?
- What are the three steps of see?
- What is an unstable zone?
- How long should you monitor your rear zone for sand barrels?
- What are true work zones?
- What might block your line of sight?
- What is an open rear zone?
- What are low risk driving basic tools?
- How would you explain closed zone around your vehicle?
- What length space is needed when backing into a parallel parking space?
- What are the three steps of zone control?
- What are the six Zone locations around a vehicle?
- How far behind the vehicle ahead of you should you remain?
- What is a changing zone?
- What is the safest turnabout method?
What is the correct forward position before turning into the angled parking space?
Slowly drive forward.
When the front of your vehicle reaches the near side of the parking space, begin turning to align your vehicle in the center of the space.
Move forward slowly and stop when you are fully in the space..
What are the three steps of see?
SEESM: A Strategy for Managing the Risk of Motor Vehicle Operation. The Motorcycle Safety Foundation (MSF), in its Basic RiderCourseSM (BRC) and other curricular products, promotes a three-part process with the acronym SEE (Search, Evaluate, Execute) as the core of a personal safe-riding strategy (see diagram).
What is an unstable zone?
What is an unstable zone. A closed zone that is becoming worse or has an added complication.
How long should you monitor your rear zone for sand barrels?
an open rear zone is space to the rear that has no L-O-S blockages within 15 seconds and no vehicles following closer than 4 secs.
What are true work zones?
Most work zones have reduced speed. Start slowing down when warning signs alert you of a reduced speed. Remember, speeding in work zones may not only carry increased fines, it also contributes to many accidents. Highway patrols or local police will often provide active enforcement support in work zones.
What might block your line of sight?
This line can be blocked by a curve, the crest of a hill, a wooded area, a large truck, etc. … If you cannot see around an obstruction, you must slow down and be ready to alter your position until you can reestablish a clear line of sight to your path of travel and targeting area.
What is an open rear zone?
An open rear zone. No cars following closer than two seconds, and an open line of sight in your rear zone would be described as: Look over the appropriate shoulder to check the blind spot before any lateral movement.
What are low risk driving basic tools?
Good searching habits and the ability to manage space on the roadway are two basic tools for-low risk driving.
How would you explain closed zone around your vehicle?
A closed zone means that it is not available for your car’s path of travel—that there is a restriction to the drivers view or that space is unavailable in a particular zone. (3) Changing Conditions: This often occurs when the driving situation changes from an open to a closed zone.
What length space is needed when backing into a parallel parking space?
Most parallel parking spaces will have a standard length of 22 feet to 26 feet. The width of the space is usually around 8 feet. Spaces designated for compact cars will have smaller dimensions, more in the 20 feet length and 7 feet width.
What are the three steps of zone control?
The Zone Control System includes three steps. What are they? 3. Create time and space by getting the best speed control, lane position, and communication.
What are the six Zone locations around a vehicle?
There are six areas of space around a vehicle: front left, front, front right, rear left, rear, and rear right.
How far behind the vehicle ahead of you should you remain?
two secondsThe two-second rule is a rule of thumb by which a driver may maintain a safe trailing distance at any speed. The rule is that a driver should ideally stay at least two seconds behind any vehicle that is directly in front of his or her vehicle.
What is a changing zone?
A zone change is the process of changing the current zone district to a different zone district. A property owner may choose to change the zoning to use his property differently from what the existing zoning allows (e.g., residential vs. commercial).
What is the safest turnabout method?
Two-point turns require the driver to head into, or back into, a driveway on the same side or on the other side of the roadway to reverse direction. It is safest to execute a 2-point turnabout by backing into a driveway on the same side of the street.