Quick Answer: Is It OK To Use 10w30 Instead Of SAE 30?

Is it OK to use 10w30 instead of 10w40?

Overall the 10W30 will be the more appropriate oil for cold weather and non-performing engines while 10W40 is perfect for warmer temperatures and older vehicles.

But, if you are still not sure what to use, talk to your local mechanic or check the vehicle’s manual..

Can I use car oil for lawnmower?

SAE 30 motor oil is commonly recommended for use in a lawn mower engine, but the safest best is to use the type of oil your lawn mower manufacturer recommends. Often 10W-30 or 10W-40, the same motor oil types that are used in vehicles, can also be used in a lawn mower.

Which oil is thicker SAE 30 or 10w30?

Nope. SAE 10W30 is an oil that has SAE 10W viscosity(thickness) at low temperatures, and SAE 30 viscosity at high temperatures. … These include temperature and the engine. Again, the SAE30 is better for warmer temperatures while the 10W30 is suitable for varying temperature range and improves cold weather starting.

Which is thicker 5w30 or 10w30?

10w30 is thicker then 5w30 because it has a higher viscosity in low temperatures. The engine oil will flow slower than 5w30 during the cold season. Thicker or higher viscosity metal oil has a better seal compared to low viscosity oil.

Can I use SAE 10w30 in my lawn mower?

Yes! We have modified our engine oil recommendations to state that you may now use a synthetic 5W30 (100074WEB) or 10W30 oil in all temperature ranges. … Keep in mind that the use of synthetic oil does not prevent you from performing your regularly scheduled lawn mower maintenance (i.e. check oil, change oil, etc.).

Is SAE 30 a detergent oil?

SAE 30 w is usually a (non detergent) motor oil that is usually used on small engines like lawn mowers, generators, and other 4stroke lawn and garden tools. 30 is the viscosity or how think it is. on most iols that will vary with temp, like a 5w-30 will be much thinner at colder temps than say a 30w-50 oil.

Is Thicker oil better for older engines?

A: Yes. This is a practical method to improve oil pressure in an older, high-mileage engine. The slightly thicker oil film from the heavier base weight oil — 10W — can help protect worn engine bearings as well.

What is SAE 30 oil used for?

SAE 30 oil is typically used for smaller air-cooled engines, like the ones in small tractors, lawnmowers, and chain saws. Most motor oils today are multi-grade oils that will perform well in all seasons.

What’s the difference between SAE 30 and 10w30?

SAE 10W30 is an oil that has SAE 10W viscosity(thickness) at low temperatures, and SAE 30 viscosity at high temperatures. The W stands for ‘Winter’. … At operating temperature, there’ll likely be little difference between SAE 30 and SAE 10W30. In theory, they’re the same at high temperature, which is IIRC set at 100C.

Can I use SAE 30 in my pressure washer?

SAE 30W non-detergent oil will also work. Use only the quantity of oil specified in your pressure washer’s owner’s manual, as too much oil could cause leaks or damage to seals.

What oil is closest to sae30?

5w-30After you look at the API specifications you need to check the viscosities, in this case you need to use 5w-30 or 10w-30 oil as a substitute for the SAE 30. You need to keep the second number the same as your straight SAE 30, this is the viscosity of the oil at operating temperature.

Can you mix 5w30 and 10w30 oil?

Yes, if topping up. If your oil must be topped up, then you are burning oil already, so the difference won’t cause more damage than is already there. 5W30 and 10W30 are essentially the same at operating temperature.

What happens if you put car oil in a lawn mower?

Lawn Mower Oil Quality A great type of oil to use in your lawn mower is SAE 30 motor oil. … Always remember when thinking about the oil that you will put into your lawn mower: lawn mowers need higher quality oil. It should be at least SAE 30 to run well. Your car can handle a lower quality oil and still be fine.

Is there a big difference between 10w30 and 10w40?

The difference between 10W-30 and a 10W-40 is the high temperature viscosity. Obviously, a 10W-40 is thicker than a 10W-30 at high temperature. … Using an oil with a low viscosity can lead to excessive metal to metal contact between moving parts.