What Happens If You Put A 13amp Fuse In A 10 Amp Plug?

Can you replace a 10amp fuse with a 13amp?

If you replaced it with 13A fuse, it will allow current more than 10A, so it may possible that other components may get damage due excessive current flow than specified.

If TV components can sustain up to 13 A current, you can replace it.

You can put a smaller fuse in with the same “speed” rating..

Can I use a 13a fuse in a 3a plug?

For an appliance rated as 700W or less, a 3A fuse should be fitted. For appliances above 700W, a 13A fuse should be fitted. … BS1363 has standardised on just two preferred fuse ratings, 3A and 13A, however any fuse rating up to 13A can still be used.

How can you tell if a 13a fuse is blown?

Look at the fuse wire. If there is a visible gap in the wire or a dark or metallic smear inside the glass then the fuse is blown and needs to be replaced.

Can you replace a 10amp fuse with a 5 amp fuse?

Possibly yes. What ever is wired into that 5 amp slot is rated for a max of 5 amps, overdrawing more than 5 amps by removing the 5 amp fuse and putting in a 10 amp fuse can possibly short out a circuit.

Can I plug a 13 amp plug into a 10 amp extension lead?

If you try to plug in a hair dryer (10A) and a kettle (13A) you will quickly overload the extension lead. … Overloading an extension could overheat the wall socket, which could cause a fire.

Can you replace a fuse with a higher amp?

In general, NO. Replacing a fuse with a higher-amp fuse is a very bad idea and can lead to fires. Fuses (and circuit breakers) are rated such that they blow or trip before any part of the circuit gets to a dangerous current. … Fix the underlying problem, and you won’t have any more blown fuses.

Can I replace a 13a fuse with a 5a fuse?

not it’s not. the device can’t take more than 5A that’s why it has a 5A fuse. if you put a 13A fuse in the device might take upto 13A before the fuse blows and more than likely you’ll fry it.

Does it matter what fuse you put in a plug?

The appliance itself is fused and that is to help protect the appliance. The fuse in a mains lead just needs to be rated at less than the maximum current capacity of the cable. So if you’re using 20 amp rated cable then a 13 amp fuse protects it.

What happens if you use the wrong amp fuse?

Fuses are present to protect the components of the electrical system. Rather than destroying the circuit when there is a surge of power, the fuse blows to protect it. … If you use a fuse with the wrong amperage, the fuse won’t blow as intended, damaging the circuit and resulting in a much larger repair bill.