When Should You Use Thicker Oil?

When should I use thicker engine oil?

Within reason, thicker oil maintains a better lubricant film between moving parts.

Some have even used thicker oil in a leaky engine to prevent oil from seeping out.

But really, thicker oil is not good for your engine.

Not when “thicker” means higher viscosity than the manufacturer recommends..

Is 20w50 good for high mileage?

The viscosity level of engine oil 20W50 is geared toward racing engines, as opposed to high-mileage engines, that run extremely hot and need heavy load operation. … Since its viscosity is so great, it can drag down the functioning of the crankshaft, resulting in less horsepower.

What happens if you put 10w40 instead of 10w30?

Changing from 10W30 to 10W40 will not do any effect on your engine if you choose right one for the right season. Engine oil is one of the main part for the engine. The grade given on the bottle of engine oil 10W30 or 10W40 it just indicates the suitable oil for different season.

Is 10w30 better for high mileage?

Both high mileage 5w30 and 10w30 engine oils have the same additives, the only difference is the viscosity at cold startups. Since both oils have the same operating temperature viscosity (30) and additives, they will perform exactly the same. However, 5w30 flows much better than 10w30 during cold starts.

What oil is better 10w30 or 5w30?

5w30 is a great multigrade oil for use in low starting temperatures as well as high summer temperatures. It is also more fuel efficient since it creates less drag on the bearings and moving engine parts. 10w30 is thicker and may provide better sealing capability for older engines.

What is 20w 50 oil used for?

SAE 20w-50 Oil – Conventional & High Mileage A SAE 20W-50 motor oil is typically used in older vehicles or in particularly warm climates. Castrol GTX 20W-50 has been specially formulated to help extend the life of your engine by keeping it free from sludge, even when operating in extremely high temperatures.

Do high mileage cars need thicker oil?

High-mileage motor oil doesn’t hurt and it could prevent leaks from starting. … Some mechanics recommend switching to a thicker (higher viscosity) oil — such as 10W-30 full synthetic oil instead of 5W-20 full synthetic — or using oil additives to stop leaks.

Is 5w30 oil thicker than 10w30?

10w30 is thicker then 5w30 because it has a higher viscosity in low temperatures. The engine oil will flow slower than 5w30 during the cold season. Thicker or higher viscosity metal oil has a better seal compared to low viscosity oil.

Does oil get thicker as it warms up?

Oil weight, or viscosity, refers to how thick or thin the oil is. … Your engine needs oil that is thin enough for cold starts, and thick enough when the engine is hot. Since oil gets thinner when heated, and thicker when cooled, most of us use what are called multi-grade, or multi-viscosity oils.

Can thick oil damage engine?

Not only that, but the engine will waste energy pumping the thicker motor oil, reducing fuel economy. Since thicker oils don’t transfer heat as well as thinner oils, operating temperatures will increase, too, possibly leading to accelerated chemical break down and harmful sludge and deposits.

Should I use 20w50 oil?

20W50 motor oil is suitable for warmer climates, where the higher temperature causes the oil to thin. It is also useful for vehicles subject to hot temperatures and for those used for high-stress activities such as hauling or pulling trailers.

What happens if I use 10w30 instead of 5w30?

Both 5w30 and 10w30 engine oils have a similar SAE rating, meaning that they will perform the same at high or operating temperatures. The digits 30 indicate the viscosity of the oils when in high temperatures. 10w30, however, will thicken more when in cold climate. 5w30 is much suitable during the cold season.

What happens if I put 10w40 instead of 5w20?

In a 5W20 engine. You could use a 0W20 oil (I use 0W20 oil) in cold weather and it would be Ok by Ford. (they will not say it is good, but they will still honor the warranty..) But 10W40 is way off, and I bet they would be not so happy over any engine problems if they found 10W40 in a failed engine.

Is it OK to use 0w20 instead of 5w30?

0w-20 is simply a different viscosity of oil. It won’t be an advantage to your engine if your manufacturer suggests you use 5w-30 and may indeed be a detriment to your engine. 0w-20 may be a recommended oil for certain conditions for your engine and may not be recommended for your engine.

Is it OK to use 20w50 oil?

If an engine oil has a high viscosity, this means that it is thick; a low viscosity means that it is thin. Select an engine oil with an SAE (viscosity) classification suitable for the prevailing outside temperatures. … F, and 20W50 is OK to use at ambient temperatures above 23 deg.

Should I use thicker oil in an older engine?

A: Yes. This is a practical method to improve oil pressure in an older, high-mileage engine. The slightly thicker oil film from the heavier base weight oil — 10W — can help protect worn engine bearings as well.

Which oil is thicker 5w30 or 10w40?

A 10w-40 motor oil is a thicker oil at startup than a 5w-30 motor oil. Therefore, 10w-40 oil clings to the engine’s moving parts more than the lower viscosity 5w-30 oil.

Is 20w50 thicker than 10w30?

SAE 20W50 is thicker than 10W30, so it’ll be longer to reach your engine parts during cold start, but the 20W50 could give your engine extra protectiom when it’s heat and being used for long time running. The sound would be smoother than the 10W30 even you get less responsive on the acceleration.

Is it OK to use 10w40 instead of 5w30?

Your vehicle does not use 5W-30 oil. The recommended oil viscosity for your vehicle, according to Kia documentation, is 10W-40. If you drive the vehicle in exceptionally cold weather, well below 32 degrees, you can use 5W-30 oil but even 10W-40 is still perfectly OK to use if outdoor temperatures are below freezing.

When should I use 20w50 oil?

20W50 motor oil is suitable for warmer climates, where the higher temperature causes the oil to thin. It is also useful for vehicles subject to hot temperatures and for those used for high-stress activities such as hauling or pulling trailers.

What is the difference between SAE 30 oil and 10w30 oil?

SAE 10W30 is an oil that has SAE 10W viscosity(thickness) at low temperatures, and SAE 30 viscosity at high temperatures. The W stands for ‘Winter’. … At operating temperature, there’ll likely be little difference between SAE 30 and SAE 10W30. In theory, they’re the same at high temperature, which is IIRC set at 100C.